Application EAF/LF smelting steel,EDM machining
Dimensions as your requirements
Chemical Composition graphite,Sulfure,Ash
Apparent Density (g/cm³ ) 1.58-1.72 g/cm3
Flexual Strength 7.5-13.5Mpa
Compressive Strength 20.0-30.0MPA
Thermal Expansion 2.3-2.5
Max Grain Size 0.8~4.0mm
name graphite electrode scrap
Packging & Delivery
Min Order1 ton
Specification for Graphite electrode scrap
|property||Unit||Test standard||Mean value||Single value|
|Apparent density||g/cm3||ISO 12985-1||>1.62||>1.59|
|Spec.electrical resistivity||μΩm||ISO 11713||<8||<10|
|Ash content||%||DIN 51903||<1.0||<1.5|
|Water content||%||DIN 51904||<1.0||<3.0|
|Size of pieces||mm||as your requriement.|
1) with grain
2) min. 4 samples per shipment
-following ISO 5022 "Sampling and acceptance testing"
-Graphite rods from electrodes or nipples, no prismatic
-No coated material
-Material must be clean and kept dry before and during transportation
• No dust and contamination
• No slag
• No metal enclosure
-Not accepted material will be sent back to the contractor on our costs.
Supplier confirms that the product supplied will meet the above listed properties.
Our production engineering and quality reach the domestic leading level and they are popular in China even in South Korea and Japan. Our products are widely used in steel, smelting, chemical industry and so on. Our products are trusted by customers and have a good future because of high technical content and good quality.
1. Delivery time?
The delivery time is around 30 days after receiving your deposit or L/C.
For trail order, we accept 10MT.
3. Payment term?
30% deposit, balance against the BL copy; 100% L/C at sight
4. Production Capacity of our factory?
300,0MT per month.